{"id":7464,"date":"2023-01-21T19:54:15","date_gmt":"2023-01-21T10:54:15","guid":{"rendered":"http:\/\/protec5461.co.jp\/protec\/?p=7464"},"modified":"2023-01-21T19:54:15","modified_gmt":"2023-01-21T10:54:15","slug":"%e5%8c%bb%e7%99%82%e7%94%a8%e3%82%b3%e3%83%8d%e3%82%af%e3%82%bf%e8%a9%a6%e9%a8%93%e6%a9%9f%e3%80%80pt-1945s","status":"publish","type":"post","link":"http:\/\/protec5461.co.jp\/protec\/?p=7464&lang=en","title":{"rendered":"Medical connector measurement system “PT-1946MC”"},"content":{"rendered":"Outline<\/b>
\r\n“PT-1946MC” can perform fitting and torsion stress test specified in common test method of former ISO 594 and ISO 80369 Part 20.
\r\nFitting and torsion stress test is performed by fixing the fitting gauge on the driving unit side and the medical connector on the torque sensor side and twisting while pressing the fitting gauge and the medical connector. Pressing is done by the electro-pneumatic regulator and the pressing load value is measured by the load cell. Torsion is done by the drive unit and the torsion torque is measured with the torque sensor.
\r\n
\r\n
\r\n\r\n
\"PT-1946MC\"

Medical connector measurement system “PT-1946MC”<\/td>\r\n<\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n
\r\n\r\n\r\nConfiguration<\/b>
\r\n
\r\n
\r\n\r\n
\r\n\"PT-1946MC_Configuration\"<\/td>\r\n<\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n\r\n
\"Before
Before the test<\/td>\r\n		<\/td>\r\n\"During
During the test<\/td>\r\n<\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n\r\n\r\n\r\nFeature<\/b>
\r\n\u25cf”PT-1946MC” can perform fitting and torsion stress test specified in common test method of former ISO 594 and ISO 80369 Part 20. <\/strong>
\r\n\u30fbfitting and torsion stress test specified of ISO80369-3 and ISO8039-6 , ISO80369-7
\r\n\u30fbISO80369-20:Common test methods
\r\n\u30fbformer ISO 594
\r\n
\r\n\r\n\u25cfPanel screen.<\/strong>
\r\nA panel screen is provided on the screen of the computer to display torque, load and angle.
\r\n
\r\n\"ISO80369_Panel
\r\n
\r\n\r\n\u25cfGraph screen.<\/strong>
\r\nTorque, load, angle curve is displayed.
\r\nSampling is performed at specified time intervals.
\r\n
\r\n\"ISO80369_Graph
\r\n
\r\n\r\n\u25cfSave measurement data as CSV file in text format.<\/strong>
\r\n
\r\n\r\n\u25cfCompact and lightweight.<\/strong>
\r\n
\r\n\r\n\u25cfHandy handle is attached for easy carrying.<\/strong>
\r\n
\r\n
\r\n
\r\n
\r\n
\r\n\r\nSpecification<\/b>
\r\nTorque sensor\u30001Nm<\/strong>\r\n
\r\n
Torque resolution<\/th>1mNm<\/th><\/tr>\r\n
Total torque accuracy<\/th>\u00b11%\u00b13Digit<\/td><\/tr>\r\n<\/table><\/div>\r\n
\r\nLord cell\u3000100N<\/strong>\r\n
\r\n
Load resolution<\/th>0.1N<\/th><\/tr>\r\n
Load Accuracy<\/th>\u00b11%\u00b13Digit<\/td><\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n
\r\n\r\nOption<\/b>
\r\nA reference connector is required to perform tests conforming to ISO 80369 and former ISO 594 using this device.It is possible to prepare an optional jig for connecting this unit to the reference connector.
\r\n\u203bNo reference connector is attached to this.Please purchase separately.<\/u>
\r\n
\r\n\u226aJig Production Example\u226b
\r\n
\r\n
\r\n\r\n
\"ISO80369_JIG\"
Former ISO594-2\u3000Fig.5<\/td>\r\n		<\/td>\r\n\"ISO80369_JIG\"
Former ISO594-2\u3000Fig.6<\/td>\r\n<\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n\r\n
\"ISO80369_JIG\"
Former ISO594-2\u3000Fig.7.8<\/td>\r\n<\/tr>\r\n<\/table><\/div>\r\n
\r\n
\r\n
\r\n\r\n<\/a>\r\nCorresponding test item<\/b>
\r\nItems in red can be tested with this unit.
\r\n\u203bLeak test is not supported.<\/u>
\r\n
\r\nISO80369
Small-bore connectors for liquids and gases in healthcare applications.
\r\nPart20:Common test methods.
\r\n
\r\n\r\n
TEST METHOD<\/th>TEST METHOD<\/th><\/tr>\r\n
FITTING<\/th>TEST<\/th><\/tr>\r\n
Annex B
Leakage by pressure
decay TEST METHOD
<\/th>		Axial force:26.5N\uff5e27.5N
Torque:0.08Nm\uff5e0.12N
Time:5s\uff5e6s<\/td>		\uff08Abridgement\uff09<\/font><\/td><\/tr>\r\n
Annex C
Falling drop positive-pressure
liquid leakage TEST METHOD<\/th>		\uff08Abridgement\uff09<\/td><\/tr>\r\n
Annex D
Subatmospheric-pressure air
leakage TEST METHOD<\/th>		\uff08Abridgement\uff09<\/td><\/tr>\r\n
Annex E
Stress cracking TEST METHOD<\/th>		\uff08Abridgement\uff09<\/td><\/tr>\r\n
Annex F
Resistance to separation from
axial load TEST METHOD<\/th>		Hold the axial force for the hold
period from the relevant
APLICATION part of ISO80369.<\/font><\/td><\/tr>\r\n
Annex G
Resistance to separation
from unscrewing TEST METHOD<\/th>		Apply an unscrewing torque
to the collar as specified
in the relevant APPLICATION
part of ISO80369.<\/font><\/td>
Annex H
Resistance to overriding
TEST METHOD<\/th>		Apply the torque specified
in the relevant
APPLICATION part of
ISO80369 to the CONNECTOR
under test.<\/font><\/td><\/tr>\r\n
Annex I
Disconnection by unscrewing
TEST METHOD<\/th>		Apply an unscrewing torque
to the CONNECTOR under
test at a rate of
approximately 2 r\/min until
the CONNECTION separates.<\/font><\/td><\/tr>\r\n<\/table><\/div>\r\n\u203bPlease refer to ISO 80369-20, ISO 80369-3, ISO 80369-6, ISO 80369-7 for details of the test.
\r\n
\r\n
\r\n\r\nFormer ISO594
Conical fitting with a 6%(Luer) taper for syringes,needles and certain other medical equipment.\r\n
\r\nPart1:General requirements<\/strong>
\r\n
\r\n
4.Requirements<\/th>5.TEST METHOD<\/th><\/tr>\r\n
FITTING<\/th>TEST<\/th><\/tr>\r\n
4.1
Dimensions<\/th>		–<\/td>5.1.4
Axial force:5N<\/tr>\r\n
4.2
Liquid leakage<\/th>		5.2.1\u30005.3.1.1\u30005.5.1
Torque:
Not exceeting 0.1Nm
Rotation:
Not exceeting 90\u00b0
Axial force:
27.5N
Time:
5s<\/td>		5.2.3
\uff08Abridgement\uff09<\/font><\/td><\/tr>\r\n
4.3
Air leakage<\/th>		5.3.1.2\uff5e5.1.7
\uff08Abridgement\uff09<\/td><\/tr>\r\n
4.4
Separation force<\/th>		5.4.2
\uff08Abridgement\uff09<\/td><\/tr>\r\n
4.5
Stress cracking<\/th>		5.5.2\u30005.5.3
\uff08Abridgement\uff09<\/td><\/tr>\r\n<\/table><\/div>\r\n\u203bPlease refer to former ISO594 for details of the test.
\r\n
\r\n
\r\n\r\nFormer ISO594
Conical fitting with a 6%(Luer) taper for syringes,needles and certain other medical equipment.
\r\nPart2:Lock fitting<\/strong>
\r\n
\r\n
4.Requirements<\/th>TEST METHOD<\/th><\/tr>\r\n
FITTING<\/th>TEST<\/th><\/tr>\r\n
4.1
Gauging<\/th>		–<\/td>5.1
\uff08Abridgement\uff09
<\/tr>\r\n
4.5
Ease of assembly<\/th>		\uff08Abridgement\uff09<\/td><\/tr>\r\n
4.2.1
Liquid leakage<\/th>		5.2.1
Torque:
Not exceeting 0.12Nm
Axial force:
Not exceeting 27.5N<\/font><\/td>		5.2.3
\uff08Abridgement\uff09<\/td><\/tr>\r\n
4.2.2
Air leakage<\/th>		5.3.2\u30005.3.3
\uff08Abridgement\uff09<\/td><\/tr>\r\n
4.3
Separation force<\/th>		5.4.2
Axial force:
Not exceeting 35N
Time:
not less than 10s<\/font><\/td><\/tr>\r\n
4.4
Unscrewing torque<\/th>		5.5.2<\/font>
Unscrewing torque:0.02Nm
Time:\r\nNor less than 10s<\/font><\/td><\/tr>\r\n
4.6
Resistance to overriding<\/th>		5.7
Torque:Not less than 0.15Nm
Time:5s<\/font><\/td><\/tr>\r\n
4.7
Stress cracking<\/th>		5.8.1
Torque:
Not less than 0.12Nm
Axial force:
Not less than 27.5N
Time:5s<\/font><\/td>		5.8.2
\uff08Abridgement\uff09<\/td><\/tr>\r\n<\/table><\/div>\r\n\u203bPlease refer to former ISO594 for details of the test.
\r\n
\r\n
\r\n
\r\n\r\nMeasurement data example<\/b>
\r\nFITTING
\r\nISO80369-20<\/strong>
\r\n
\r\n\"ISO80369-20_FITTING\"
\r\n
\r\n\"ISO80369_FITTING\"\r\n
\r\n

\r\n\r\nResistance to separation from unscrewing TEST METHOD
\r\nISO80369-20 Annex G<\/strong>
\r\n
\r\n\"ISO80369-20_Resistance\r\n

\r\n\"ISO80369-20_Resistance\r\n
\r\n

\r\n\r\nResistance to overriding TEST METHOD
\r\nISO80369-20 Annex H<\/strong>
\r\n
\r\n\"ISO80369_Resistance\r\n

\r\n\"ISO80369_Resistance\r\n","protected":false},"excerpt":{"rendered":"

Outline “PT-1946MC” can perform fitting and torsion stress test specified in common test method of … \u7d9a\u304d\u3092\u8aad\u3080 →<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_locale":"en_US","_original_post":"http:\/\/protec5461.co.jp\/protec\/?p=3943","footnotes":""},"categories":[1],"tags":[],"class_list":["post-7464","post","type-post","status-publish","format-standard","hentry","category-1","en-US"],"_links":{"self":[{"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/posts\/7464","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=7464"}],"version-history":[{"count":1,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/posts\/7464\/revisions"}],"predecessor-version":[{"id":7465,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=\/wp\/v2\/posts\/7464\/revisions\/7465"}],"wp:attachment":[{"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=7464"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=7464"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/protec5461.co.jp\/protec\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=7464"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}